WARF: P08425US

Efficient and Automated Analysis of Thin Structures to Enhance Engineering 3-D Modeling Software


Krishnan Suresh, Kavous Jorabchi, Josh Danczyk

The Wisconsin Alumni Research Foundation (WARF) is seeking commercial partners interested in licensing technology for efficient and automated analysis of thin structures based on a novel dual representation strategy to enhance 3-D modeling software used by mechanical engineers in computer-aided design.
OVERVIEWMechanical engineers commonly employ a software modeling tool called finite element analysis (FEA) to virtually simulate a design prior to physical prototyping.  In FEA, a three dimensional (3-D) model is broken down into small elements, and element stiffness matrices are assembled to develop a behavioral response of the model.  FEA is an integral part of engineering design, and it is usually applied repeatedly until the model is optimized to meet desired performance.

Unfortunately, as is well known, 3-D FEA becomes computationally intractable when analyzing thin structures.  Indeed, for thin structures, the common practice is to carry out an explicit geometric reduction in which the 3-D object is reduced to one or two dimensions such as beams, plates or shells before applying FEA.  Though well understood, geometric reduction often demands model simplification and expert intervention, which makes implementation difficult and time-consuming.
THE INVENTIONUW-Madison researchers have developed a new technology for a fully automated and efficient analysis of thin structures.  The new process overcomes the limitations of conventional geometric reduction and 3-D FEA by providing a dual-representation, in which the geometry is captured in 3-D, but the physics of the structure are captured via classic beam, plate or shell theory. 

The integration of 3-D geometry and lower-dimensional physics leads to numerous advantages:
  1. The technology can be directly integrated into 3-D CAD systems.
  2. The 3-D CAD model need not be simplified or dimensionally reduced prior to analysis.
  3. A boundary triangulation of the CAD model is sufficient for analysis, i.e., a 3-D mesh is not required.
  4. It retains the ability to achieve the accuracy of modern lower-dimensional beam, plate and shell methods.
This process is particularly well-suited for analyzing thin structures since it offers the flexibility and generality of 3-D FEA and the computational efficiency and accuracy of beam, plate or shell analysis.  The new method and system will streamline 3-D structural analysis in many fields of engineering design because this process can be incorporated into traditional CAD software via conventional integration techniques. 
  • Analysis and optimization of high aspect ratio structures in 3-D CAD environment
  • Analysis and optimization of structures with both slender and non-slender components
  • Engineering design of aircraft, automobiles, microelectrochemical systems, microfluidic systems, microcantilevers and other microdevices
  • Can be automated and integrated in a shape optimization process
  • Can iteratively determine correct reduction process to analyze behavior of element
  • Can apply shape optimization to both slender and non-slender elements
  • Provides flexibility and generality of 3-D FEA method
  • Offers computational efficiency and accuracy of 1-D beam/plate/shell analysis methods
STAGE OF DEVELOPMENTThe iterative technique was used to optimize the shape of a microcantilever. A pilot implementation also is underway; please see the figure for an exemplary screen shot.

The development of this technology was supported by WARF Accelerator. WARF Accelerator selects WARF's most commercially promising technologies and provides expert assistance and funding to enable achievement of commercially significant milestones. WARF believes that these technologies are especially attractive opportunities for licensing.
For More Information About the Inventors
  • Mishra V. and Suresh K. 2009. Efficient Analysis of 3-D Plates via Algebraic Reduction. ASME IDETC Conf., San Diego.
Contact Information
For current licensing status, please contact Emily Bauer at or 608-960-9842.

Screen shot of a microcantilever from a pilot implementation of the 3-D modeling software. Screen shot of a microcantilever from a pilot implementation of the 3-D modeling software.

The WARF Advantage

Since its founding in 1925 as the patenting and licensing organization for the University of Wisconsin-Madison, WARF has been working with business and industry to transform university research into products that benefit society. WARF intellectual property managers and licensing staff members are leaders in the field of university-based technology transfer. They are familiar with the intricacies of patenting, have worked with researchers in relevant disciplines, understand industries and markets, and have negotiated innovative licensing strategies to meet the individual needs of business clients.