Technologies
PDF


WARF: P08398US

Vertical Cavity Light Sources Based on Stacked Membranes


INVENTORS -

Zhenqiang Ma, Weidong Zhou

The Wisconsin Alumni Research Foundation (WARF) is seeking commercial partners interested in developing vertical cavity light-emitting sources based on stacked membranes.
OVERVIEWImprovements in technologies such as cell phones, laptops and small digital electronics are the result of the increasing capability of electronics and photonics. However, there is a continuing need for improved interconnectivity between the “photonics domain” and the “electronics domain” in multifunctional photonic/electronic systems. Mismatched physical scaling between photonic components and electronic components creates difficulties in high-density integration of photonics and silicon-compatible optoelectronics, or electronics that control and detect light.

Vertical cavity light-emitting sources can be wafer-scale fabricated in high-density 2-D arrays, and have low diffraction output beams that allow efficient coupling. Therefore, vertical cavity light-emitting sources, including light-emitting diodes and lasers, could be ideal compact light sources for large-scale silicon-based photonics if they could be directly built on a silicon wafer. However, conventional vertical cavity light-emitting source technology utilizes thick reflector mirrors, which limit device performance and integration density. A need exists for a practical silicon-integrated light source that is highly efficient, ultra-compact, electrically controllable, complementary metal-oxide-semiconductor (CMOS) process-compatible and reliable.
THE INVENTIONUW–Madison researchers in collaboration with researchers at the University of Texas at Arlington have developed a system and method to fabricate vertical cavity light-emitting sources that utilize patterned membranes as reflectors. The vertical cavity light-emitting sources have a stacked structure that includes an active region placed between an upper reflector and a lower reflector. The active region and upper and lower reflectors can be fabricated from single or multilayered thin films of solid state materials or membranes, which can be processed separately and stacked to form a vertical cavity light-emitting source. As a result, the vertical cavity light-emitting sources can be compact, with thickness smaller than 3 µm.

The use of patterned membranes as reflectors makes it possible to eliminate thick mirror reflectors from the vertical cavity light-emitting source structure, which facilitates high-density array fabrication on a single substrate. In addition, by tailoring the structural parameters of the patterned membranes, different vertical cavity light-emitting sources in an array can be tailored to produce different output radiation wavelengths from ultraviolet through far-infrared.
APPLICATIONS
  • Silicon-based photonic and electronic chips for high performance computing
  • High-resolution, reliable and flexible displays
  • Low cost photo transceivers for wavelength conversion, imaging and sensing
KEY BENEFITS
  • Allows fabrication of vertical cavity light-emitting sources on substrates not typically considered compatible
  • Enables heterogeneous integration with a variety of substrates, including silicon wafers
  • Eliminates the lattice-mismatch concern between photonic and electronic domains
  • Minimizes surface state impact from the reflector/active region interfaces by placing electrical contacts between the active region and reflectors
  • May be tailored to emit output radiation across a range of wavelengths
STAGE OF DEVELOPMENTThe development of this technology was supported by WARF Accelerator. WARF Accelerator selects WARF's most commercially promising technologies and provides expert assistance and funding to enable achievement of commercially significant milestones. WARF believes that these technologies are especially attractive opportunities for licensing.
ADDITIONAL INFORMATION
For More Information About the Inventors
Related Intellectual Property
Contact Information
For current licensing status, please contact Jeanine Burmania at jeanine@warf.org or 608-960-9846.
The WARF Advantage

Since its founding in 1925 as the patenting and licensing organization for the University of Wisconsin-Madison, WARF has been working with business and industry to transform university research into products that benefit society. WARF intellectual property managers and licensing staff members are leaders in the field of university-based technology transfer. They are familiar with the intricacies of patenting, have worked with researchers in relevant disciplines, understand industries and markets, and have negotiated innovative licensing strategies to meet the individual needs of business clients.